CHS 33.7×2.6 (EN 10210)

Cross-Section Profile — CHS 33.7×2.6 (to scale)

All dimensions in mm · Circular hollow section · G = 1.99413 kg/m · EN 10210

1.99413

kg / m

2.54029

A (cm²)

3.09271

Iy (cm⁴)

1.83544

Wy (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Outer diameter D 33.7 mm

Wall / leg thickness t 2.6 mm

Inner diameter (D − 2t) ID 28.5 mm

Area A 2.54029 cm²

Mass per length G 1.99413 kg/m

Second moment (y-y) Iy 3.09271 cm⁴

Elastic modulus (y-y) Wy 1.83544 cm³

Plastic modulus (y-y) Wpl,y 2.5206 cm³

Radius (y-y) iy 1.10339 cm

Second moment (z-z) Iz 3.09271 cm⁴

Elastic modulus (z-z) Wz 1.83544 cm³

Plastic modulus (z-z) Wpl,z 2.5206 cm³

Radius (z-z) iz 1.10339 cm

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.