CHS – Circular Hollow

CHS 60.3×3 (EN 10210)

Not yet verified against an official manufacturer table — check before use.

OD = 60.3 mm · WT = 3 mm · G = 4.23931 kg/m

EN 10210 Circular hollow section
Cross-Section Profile — CHS 60.3×3 (to scale)

All dimensions in mm · Circular hollow section · G = 4.23931 kg/m · EN 10210

4.23931
kg / m
5.4004
A (cm²)
22.2246
Iy (cm⁴)
7.37134
Wy (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Outer diameter D 60.3 mm
Wall / leg thickness t 3 mm
Inner diameter (D − 2t) ID 54.3 mm
Area A 5.4004 cm²
Mass per length G 4.23931 kg/m
Second moment (y-y) Iy 22.2246 cm⁴
Elastic modulus (y-y) Wy 7.37134 cm³
Plastic modulus (y-y) Wpl,y 9.85887 cm³
Radius (y-y) iy 2.02864 cm
Second moment (z-z) Iz 22.2246 cm⁴
Elastic modulus (z-z) Wz 7.37134 cm³
Plastic modulus (z-z) Wpl,z 9.85887 cm³
Radius (z-z) iz 2.02864 cm

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.