CHS 1016×16 (EN 10210)

Cross-Section Profile — CHS 1016×16 (to scale)

All dimensions in mm · Circular hollow section · G = 394.584 kg/m · EN 10210

394.584

kg / m

502.655

A (cm²)

628479

Iy (cm⁴)

12371.6

Wy (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Outer diameter D 1016 mm

Wall / leg thickness t 16 mm

Inner diameter (D − 2t) ID 984 mm

Area A 502.655 cm²

Mass per length G 394.584 kg/m

Second moment (y-y) Iy 628479 cm⁴

Elastic modulus (y-y) Wy 12371.6 cm³

Plastic modulus (y-y) Wpl,y 16001.4 cm³

Radius (y-y) iy 35.3599 cm

Second moment (z-z) Iz 628479 cm⁴

Elastic modulus (z-z) Wz 12371.6 cm³

Plastic modulus (z-z) Wpl,z 16001.4 cm³

Radius (z-z) iz 35.3599 cm

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.