FB 200×20 (EN 10058)

Cross-Section Profile — FB 200×20 (to scale)

All dimensions in mm · Flat bar · G = 31.4 kg/m · EN 10058

31.4

kg / m

A (cm²)

1333.33

Iy (cm⁴)

133.333

Wy (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Wall / leg thickness t 20 mm

Area A 40 cm²

Mass per length G 31.4 kg/m

Second moment (y-y) Iy 1333.33 cm⁴

Elastic modulus (y-y) Wy 133.333 cm³

Plastic modulus (y-y) Wpl,y —

Radius (y-y) = √(Iy/A) iy 5.7735 cm

Second moment (z-z) Iz —

Elastic modulus (z-z) Wz —

Plastic modulus (z-z) Wpl,z —

Radius (z-z) iz 5.774 cm

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.