IPB Wide Flange (DIN)

IPB 240 (DIN 1025)

Not yet verified against an official manufacturer table — check before use.

h = 240 mm · b = 240 mm · tw = 10 mm · tf = 17 mm · G = 83.2 kg/m

DIN 1025 I/H section
Cross-Section Profile — IPB 240 (to scale)

All dimensions in mm · I/H section · G = 83.2 kg/m · DIN 1025

83.2
kg / m
106
A (cm²)
11260
Iy (cm⁴)
938
Wy (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Overall depth h 240 mm
Width b 240 mm
Web thickness tw 10 mm
Flange thickness tf 17 mm
Area A 106 cm²
Mass per length G 83.2 kg/m
Second moment (y-y) Iy 11260 cm⁴
Elastic modulus (y-y) Wy 938 cm³
Plastic modulus (y-y) Wpl,y —
Radius (y-y) = √(Iy/A) iy 10.3066 cm
Second moment (z-z) Iz —
Elastic modulus (z-z) Wz —
Plastic modulus (z-z) Wpl,z —
Radius (z-z) iz 10.5 cm

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.