IPE 360 (EN 10365) | SectionLib

Cross-Section Profile — IPE 360 (to scale)

All dimensions in mm · I/H section · G = 57.1 kg/m · EN 10365

57.1

kg / m

72.7

A (cm²)

16260

Iy (cm⁴)

903.6

Wy (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Overall depth h 360 mm

Width b 170 mm

Web thickness tw 8 mm

Flange thickness tf 12.7 mm

Root radius r 18 mm

Area A 72.7 cm²

Mass per length G 57.1 kg/m

Second moment (y-y) Iy 16260 cm⁴

Elastic modulus (y-y) Wy 903.6 cm³

Plastic modulus (y-y) Wpl,y 1019 cm³

Radius (y-y) = √(Iy/A) iy 14.9552 cm

Second moment (z-z) Iz 1043 cm⁴

Elastic modulus (z-z) Wz 122.7 cm³

Plastic modulus (z-z) Wpl,z 191 cm³

Radius (z-z) = √(Iz/A) iz 3.78769 cm

Torsion constant It 37.44 cm⁴

Warping constant Iw 313500 cm⁶

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.