W-Shapes (ASTM A6)

W 36×210 (ASTM A6)

Source: AISC Shapes Database v16.0. Verified fields: A, G, It, Iw, Iy, Iz, Wply, Wplz, Wy, Wz, b, h, iy, iz, tf, tw. Other fields remain unverified unless identified as calculated. Native AISC x-x maps to stored major Iy; native y-y maps to stored minor Iz. Display uses native x-x/y-y.

h = 932 mm · b = 310 mm · tw = 21.1 mm · tf = 34.5 mm · G = 313 kg/m

ASTM A6 I/H section
Cross-Section Profile — W 36×210 (to scale)

All dimensions in mm · I/H section · G = 313 kg/m · ASTM A6

313
kg / m
399
A (cm²)
549000
Ix (cm⁴)
11800
Sx (cm³)

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section Properties

Overall depth h 932 mm
Width b 310 mm
Web thickness tw 21.1 mm
Flange thickness tf 34.5 mm
Area A 399 cm²
Mass per length G 313 kg/m
Second moment (x-x) Ix 549000 cm⁴
Elastic modulus (x-x) Sx 11800 cm³
Plastic modulus (x-x) Zx 13700 cm³
Radius (x-x) rx 37.1 cm
Second moment (y-y) Iy 17100 cm⁴
Elastic modulus (y-y) Sy 1110 cm³
Plastic modulus (y-y) Zy 1750 cm³
Radius (y-y) ry 6.55 cm
Torsion constant It 1170 cm⁴
Warping constant Iw 34400000 cm⁶

Using this section record

Read the axis labels before using inertia or modulus: the major and minor axes are not interchangeable. Dimensions are in millimetres; area is in cm², second moments in cm⁴, moduli in cm³ and radii in cm. Convert powers of length consistently when transferring values to a calculation.

A Source line covers only its listed verified fields. Other fields remain subject to verification. A dash is unavailable, never zero. Withheld values must not be inferred from the remaining dimensions. Nominal mass and dimensions are reference values rather than measured tolerances or procurement guarantees. Confirm the exact product, manufacturing route, grade and thickness with the manufacturer. Section properties alone do not establish member resistance: stability, effective length, connections and project design requirements need separate assessment.