Unequal Angles

Source: ArcelorMittal Sales Programme V2026-1; SCI Blue Book (BS EN 10056-1:2017). Exact official matches: 13 of 19 records; unmatched records and fields remain unverified.

Not yet verified against an official manufacturer table — check before use.

EN 10056-1 · 19 sections

Free Reference Data

Unequal leg angles have two different leg lengths and are specified to EN 10056-1. They provide design flexibility when different dimensions are needed in each direction, common in crane girder flanges and eccentric connections.

Axes: y-y / z-z. Values from the shared section record; — means unavailable.

Reference values — verify against the current edition of the applicable standard or manufacturer's table before design use.

Section	A (cm²)	G (kg/m)	Major I (cm⁴)	Minor I (cm⁴)	Major elastic modulus (cm³)	Minor elastic modulus (cm³)
L 60×40×5	4.79	3.76	17.2	6.11	4.25	2.02
L 60×40×6	5.68	4.46	20.1	7.12	5.03	2.38
L 65×50×5	5.54	4.35	23.2	11.9	5.14	3.19
L 75×50×6	7.19	5.65	40.5	14.4	8.01	3.81
L 80×40×6	6.89	5.41	44.9	7.59	8.73	2.44
L 80×60×6 Not yet verified against an official manufacturer table — check before use.	8.13	6.38	49.8	—	8.47	—
L 80×60×8 Not yet verified against an official manufacturer table — check before use.	10.6	8.36	63.8	—	11	—
L 100×50×6	8.71	6.84	89.9	15.4	13.8	3.89
L 100×50×8	11.4	8.97	116	19.7	18.2	5.08
L 100×65×7	11.2	8.77	113	37.6	16.6	7.53
L 100×75×8	13.5	10.6	133	64.1	19.3	11.4
L 120×80×8 Not yet verified against an official manufacturer table — check before use.	15.5	12.2	256	—	27.9	—
L 120×80×10 Not yet verified against an official manufacturer table — check before use.	19.2	15.1	313	—	34.5	—
L 150×75×9 Not yet verified against an official manufacturer table — check before use.	19.7	15.5	534	—	46.5	—
L 150×90×10	23.2	18.2	533	146	53.3	21
L 150×100×10 Not yet verified against an official manufacturer table — check before use.	24.6	19.3	728	—	61.3	—
L 200×100×10	29.2	23	1	1	1	1
L 200×100×12	34.8	27.3	1	1	1	1
L 200×150×12	40.8	32	1650	803	119	70.5